sinee — 12.5 Example

EM500 Open-Loop Vector Control Inverter User Manual [ 7 ]: Valid data frame: sent by the external master (other than the keypad) to inverter, and the function code, data length and CRC are correct As shown in Figure 12–4, data sending section (t s ), sending end mark section (t w1 ), 75176 forwarding waiting section (t w2 ), data return section (t r ) and 75176 receipt section t w3 t t w2 t s t w1 t r Figure 12-4 Time Sequence Translation of Complete Data Frame 12.4.4 Communication Overtime Communication interval △ t refers to the period from the previous receipt of a valid data frame by slave (inverter) to the receipt of a valid data frame again.

If △ t is greater than the set time (see F10.03; this function is disabled if it is set as 0), this is called “communication overtime” Send Send Send Return Return Return Return Figure 12-5485 Network Link Data 12.5 Example 1) Inverter forward Send: 01 41 70 0000 01 E6 C5 406