EM500 Open-Loop Vector Control Inverter User Manual 13.2.2.4 Diagnostic function code ( 0x700 ) The function code is used to check whether the communication between the master and the slave is normal. The host sends any 2-byte contents. The normal status response packet is the slave address + exception code, and the contents are copied. request message Response message Error message The following is an example of using the diagnostic function code to send data 0x55AA to a device with node address 1:
419 Register 10 Abnormal 00 Abnormal code 05 address code Lo Register 13 Values Hi Register 88 Values Lo CAN-ID 0x700+slave address DLC(Date Length) 2 Data Field 2 Bytes CAN-ID 0x700+ Host address DLC(Date Length) 2 Data Field Slave address+ Abnormal code(00) CAN-ID 0x780+ Host address DLC(Date Length) 2 Data Field Slave address+ Abnormal code