EM600 High-Performance Vector Control Inverter User Manual Function codes mentioned above are nameplate parameters of induction motor. For the first time when inverter is wired to motor, please set parameters above as per motor nameplate before inverter running, regardless of control mode, VF control mode or vector control mode. When motor rated power (F01.01), inverter will modify values of parameters of F01.03 - F01.08 automatically. Please pay attention while using inverter. F01.09 - F01.13 are parameters of induction motor. However, user can not get these parameters generally. Please autotune motor parameters by using F01.34.
After motor parameters of F01.01 - F01.08 are modified, inverter will modify the parameters of F01.09 - F01.13. Please pay attention. User must set parameters of F01.00 - F01.08 as per actual applications before motor parameter autotuning. Meanings of motor parameters are illustrated in Figure 7–6:
133 Function Name of Function Parameter Description Unit Default Property Code Code Factor Model F01.08 Motor Efficiency 30.0 - 100.0 % Up To Specific Model 〇 Function Name of Parameter Description Unit Default Property Code Function Code F01.09 Stator Resistor of Induction Motor 1 - 60000 (Motor Rated Power ≤ 75kW) 0.1 - 6000.0 (Motor Rated Power >75kW) mΩ Up To Specific Model 〇 F01.10 Rotor Resistor of Induction Motor 1 - 60000 (Motor Rated Power ≤ 75kW) 0.1 - 6000.0 (Motor Rated Power >75kW) mΩ Up To Specific Model 〇 F01.11 Leakage Inductance of Induction Motor 0.01 - 600.00 (Motor Rated Power ≤ 75kW) 0.001 - 60,000 (Motor Rated Power >75kW) mH Up To Specific Model 〇 F01.12 Mutual Inductance of Induction Motor 0.1 - 6000.0 (Motor Rated Power ≤ 75kW) 0.01 - 600.00 (Motor Rated Power >75kW) mH Up To Specific Model 〇 F01.13 Idling Excitation Current of Induction Motor 0.01 - 600.00 (Motor Rated Power ≤ 75kW) 0.1 - 6000.0 (Motor Rated Power >75kW) A Up To Specific Model 〇