EM600 High-Performance Vector Control Inverter User Manual 143 Set Function Description Value function of PID stops, but proportional adjustment and differential adjustment of PID are still enabled, so this function is called “integral separation”. See F09.20 for details. 43 PID Parameter Switching PID parameter switch is completed by numeric input terminal (F09.11=2). If terminal is enalbed, then PID parameters may be switched. See F09.05 - F09.13 for details.
44 PID Positive/Negative Reation Switch When terminal is enabled, inverter will switch between PID action mode and positive/negative reaction 45 Stop and DC Brake Not to trigger stop command, and start braking when the start frequency of DC brake at stop (F04.20) is reached. The brake time shall be either terminal closing time or time of DC brake at stop (F04.22), see whichever is longer. 46 DC Brake at Stop Not to trigger stop command, and start braking when the start frequency of DC brake at stop (F04.20) is reached after having received a stop command. The brake time shall be either terminal closing time or time of DC brake at stop (F04.22), see whichever is longer.
47 Immediate DC Brake After this terminal is enabled, inverter stops and starts DC brake at present frequency immediately. Brake current is determined by DC Brake Current at Stop (F04.21). 48 Fatest Coast-To-Stop When this terminal is enabled, inverter stops at permitted fatest acceleration/decleration time. 49 Not Used 50 External Stop Inverter stops as set stop mode (F04.19) and acceleration/deceleration 4 (F15.07/F15.08) when this terminal is enabled.
51 Switch Main Frequency Source to Numeric Frequency Setting If this terminal is enabled, the main frequency source will be switched to corresponding setting under applications that the main freqeuncy source A is involved in setting and inverter is not in preset speed mode; functions of 51 to 56 may work independently, but have a priority sequence. See Table 7-1 of F00.04 for details. 52 Swtich Main Frequency Source to AI1 53 Swtich Main Frequency Source to AI2 54 Swtich Main Frequency Source to AI3 55 Switch Main Frequency Source to High-Frequency Pulse Input 56 Switch Main Frequency Source to Communication Setting