EM600 High-Performance Vector Control Inverter User Manual Xi Input Delay Figure 7-9 Terminal Delay Sampling The terminal will delay to response according to function code setting, when function terminal status changes. At present, terminals X1 - X4 support this function. Specific actions: this function will be active after function terminal changes from disabled status to enabled status and the effective delay time is reached; this function terminal becomes inactive after function terminal changes from enabled status to disabled status and the ineffective delay time is reached. ★ If function code is set as 0.000s, the delay is disabled accordingly.
Effective Delay Ineffective Delay EM600 inverter supports the high-speed pulse input (HDI) function, and terminal X7 is shared. F02.26 - F02.30 are used to set pulse filter time and corresponding offset curve. As indicated in Figure 7-10, the system realizes the line offset through setting of the two points (F02.26, F02.27) and (F02.28, F02.29) according to input pulse frequency size, and the input outside the frequency range will be cut off.
146 Function Code Name of Function Code Parameter Description Unit Defaul t Property F02.21 X2 Ineffective Delay Time 0.000 - 30.000 s 0.000 ● F02.22 X3 Effective Delay Time 0.000 - 30.000 s 0.000 ● F02.23 X3 Ineffective Delay Time 0.000 - 30.000 s 0.000 ● F02.24 X4 Effective Delay Time 0.000 - 30.000 s 0.000 ● F02.25 X4 Ineffective Delay Time 0.000 - 30.000 s 0.000 ● Function Name of Function Code Parameter Description Unit Default Property Code F02.26 Minimum Input Pulse Frequency 0.00 – Maximum Input Pulse Frequency F02.28 kHz 0.00 ● F02.27 etting Corresponding to Minimum Input –100.0 - +100.0 % 0.0 ● F02.28 Maximum Input Pulse Frequency 0.01 - 100.00 kHz 50.00 ● F02.29 Setting Corresponding to Maximum Input –100.0 - +100.0 % 100.0 ● F02.30 Pulse Input Filter Time 0.00 - 10.00 s 0.10 ●