EM600 High-Performance Vector Control Inverter User Manual F04.10: The scanning speed starting from set frequency to downward tracking at torque tracking; this time refers to the period that the rated frequency decreases to 0.00 Hz. F04.11: Tracking current, which is a ratio relative to inverter rated current. The lower the current is, the smaller the impact of motor will be, so is tracking accuracy. However, if current is set at an excessively low value, the tracking results may be inaccurate, which result in the start failure. The higher the current is, the fewer motor rotation speed drop at tracking will be; please increase set value for heavy load tracking occasions. F04.12:
Tracking intensity. Generally, the default is usually adopted. This value may be increased when the tracking speed is high and results in a voltage fault. 159 Function Name of Function Code Parameter Description Unit Default Property Code F04.09 Not Used - - - - F04.10 Deceleration Time of Rotation Speed Tracking 0.1 - 20.0 s 2.0 〇 F04.11 Rotation Speed Tracking Current 30.0 - 150.0 (100.0=Inverter Rated Current) % 60.0 ● F04.12 Rotation Speed Compensation Gain 1.00 - 1.30 1.05 ● Function Name of Function Code Parameter Description Unit Default Property Code F04.14 Acceleration/Deceleration Mode 0: Linear Acceleration/Deceleration 1:
S Curve Acceleration/Deceleration 0 〇 F04.15 S Curve Start Section Time at Acceleration 0.00 - System acceleration time/2 (F15.13=0) 0.0 - System acceleration time/2 (F15.13=1) 0 - System acceleration time/2 (F15.13=2) s 1.00 ● F04.16 S Curve End Section Time at Acceleration 0.00 - System acceleration time/2 (F15.13=0) 0.0 - System acceleration time/2 (F15.13=1) 0 - System acceleration time/2 (F15.13=2) s 1.00 ● F04.17 S Curve Start Section Time at Deceleration 0.00 - System deceleration time/2 (F15.13=0) 0.0 - System deceleration time/2 (F15.13=1) 0 - System deceleration time/2 (F15.13=2) s 1.00 ● F04.18 S Curve End Section Time at Deceleration 0.00 - System deceleration time/2 (F15.13=0) 0.0 - System deceleration time/2 (F15.13=1) 0 - System deceleration time/2 s 1.00 ●