EM600 High-Performance Vector Control Inverter User Manual F05.07=5: Process PID VF separation output voltage is determined by process PID (see 7.10). F05.07=6: Communication Setting VF separation output voltage is determined through communication. If inverter is under master-slave communication control (F10.05=1) and present inverter is a slave (F10.06=0), VF separation output voltage is set as “700FH (master-slave communication Setting) * F01.02 (Motor Rated Voltage) * F10.08 (Receiving Proportionality Factor of Slave)”. Range of 700FH is 0.00% to 100.00%. See Table 12-2 for details.
For general communication (F10.05=0), VF separation output voltage is set as “7006H (VF separation mode voltage setting) * F05.08 (Numeric Setting of VF Separation Voltage)”. Range of 7006H is 0.00% to 100.00%. See Table 12-2 for details. Voltage rise time of VF separation is the time that the voltage increases from 0 to motor rated voltage. Output Voltage Motor Rated Voltage VF Separation Voltage Actual Rise Time t 0 设定上升时间 Set Rise Time Figure 7-21 Voltage Rise Time of VF Separation This function code is used to compensate for the voltage drop generated by rotor resistor and cable, and promote loading capacity at low frequency of inverter.
Motor rotor speed decreases as the load increases, in order to ensure the motor under rated load, the rotor speed near synchronous speed, to enable slip compensation. When the motor speed is below target, to increase F05.11 set value; F05.11=0 V/F Slip Compensation is invalid.
The parameter is only valid for asynchronous motor 166 Function Name of Function Code Parameter Description Unit Default Property Code F05.09 Voltage Rise Time of VF Separation 0.00 - 60.00 s 2.00 ● Function Name of Function Code Parameter Description Unit Default Property Code F05.10 Compensation Gain for V/F Stator Voltage Drop 0.00 - 200.00 % 100.00 ● Function Name of Function Code Parameter Description Unit Default Property Code F05.11 V/F Slip Compensation Gain 0.00 - 200.00 % 100.00 ● F05.12 V/F Slip Filter Time 0.00 - 10.00 s 1.00 ●