EM600 High-Performance Vector Control Inverter User Manual EM600 inverter supports multiple communication protocols. Except inverter for Modbus-RTU, user must buy an expansion card of the company independently. Please contact your dealer if necessary. For setting of address of communication expansion card, user only needs to set function code corresponding to present expansion card. This function code is used to determine the delay response time of communication card after master sends data to communication card. When selecting a communication expansion card, CANopen or DeviceNet, user needs to set bit rates for communication between expansion card and bus.
When a selected expansion card is Profibus-DP, user needs to set communication format. Please refer to expansion card manual for details. 197 Function Code Name of Function Code Parameter Description Unit Default Property 2: CANopen Protocol 3:
DeviceNet Protocol Function Code Name of Function Code Parameter Descriptio n Unit Default Property F10.11 Communication Address of Profibus-DP Expansion Card 1 - 125 1 〇 F10.12 Communication Address of CANopen Expansion Card 1 - 127 1 〇 F10.13 Communication Address of DeviceNet Expansion Card 0 - 63 1 〇 Function Parameter Name of Function Code Unit Default Property Code Description F10.14 Response Delay Time of Process Data of Communication Card 0.0 - 200.0 ms 0.0 〇 Function Name of Function Code Parameter Description Unit Default Property Code F10.15 Bit Rate of Communication between Expansion Card and Bus Ones Place: CANopen 0: 125K 1: 250K 2: 500K 3: 1M Tens Place: DeviceNet 0: 125K 1:
250K 2: 500K 23 〇 Function Name of Function Code Parameter Description Unit Default Property Code F10.16 PROFIBUS Communication Format 0: PPO1 1: PPO2 2: PPO3 3: PPO4 4: PPO5 ×