EM600 High-Performance Vector Control Inverter User Manual ★ By setting this parameter, inverter can not be used normally. Please pay enough attention. This function is used to set accumulated run reach time. When accumulated run time (F12.17) is equal to or greater than set accumulated run reach time (F16.08), inverter can not be used. ★ By setting this parameter, inverter can not be used normally. Please pay enough attention. Factory Password ★ By setting this password, inverter can not be used normally. Please pay enough attention. 7.18 F17 Group: Virtual I/O Function Parameter EM600 inverter has 8 multi-function virtual input terminals (VX1 - VX8).
Their functions and use methods are basically the same as actual input terminals. In the following, only the difference will be described. For the same functions and use methods as that of actual input terminals, please refer to F02 Input Terminal Function Parameters. 224 Function Name of Function Code Parameter Description Unit Default Property Code F16.08 Set Accumulated Run Time Reach 0 - 65535, 0:
Run Time Reach Protection Disabled h 0 〇 Function Name of Function Code Parameter Description Unit Default Property Code F16.09 Factory Password 0 - 65535 XXXXX ● Function Code Name of Function Code Parameter Description Unit Default Property F17.00 VX1 Virtual Input Function Same as options of F02 group numeric input terminals, please refer to Table 7–2 Functions of Numeric Multi-Function Input Terminals 0 〇 F17.01 VX2 Virtual Input Function 0 〇 F17.02 VX3 Virtual Input Function 0 〇 F17.03 VX4 Virtual Input Function 0 〇 F17.04 VX5 Virtual Input Function 0 〇 F17.05 VX6 Virtual Input Function 0 〇 F17.06 VX7 Virtual Input Function 0 〇 F17.07 VX8 Virtual Input Function 0 〇 F17.08 Positive/Negative Logic of Virtual Input D7 D6 D5 D4 D3 D2 D1 D0 000 00000 〇 VX8 VX7 VX6 VX5 VX4 VX3 VX2 VX1 0:
Positive Logic, Enabled at On/Disabled at Off