sinee — 6.2 Function Parameter Table

EM600 High-Performance Vector Control Inverter User Manual 72 Function Name of Function Parameter Description Unit Default Property Code Code Y2 High-Frequency Pulse Output F03.25 0% Frequency of Y2 High-Frequency Pulse Output 0.00 - 100.00 kHz 0.00 ● F03.26 Filter Time of Y2 High-Frequency Pulse Output 0.00 - 10.00 s 0.10 ● F03.27 M1 Output Offset -100.0 - 100.0 % 0.0 ● F03.28 M1 Output Gain -10.00 - 10.00 1.00 ● F03.29 M2 Output Offset -100.0 - 100.0 % 0.0 ● F03.30 M2 Output Gain -10.00 - 10.00 1.00 ● F04 Start/Stop Control Parameter Group F04.00 Start Mode 0: Start Directly 1:

Rotation Speed Tracking Start 0 〇 F04.01 Start Frequency 0.00 - 10.00 Hz 0.00 〇 F04.02 Start Frequency Retention time 0.00 - 60.00, Disabled at 0.00 s 0.00 〇 F04.03 DC Brake Current at Start 0.0 - 100.0 (100.0= Inverter Rated Frequency) % 100.0 〇 F04.04 DC Brake Time at Start 0.00 - 30.00 s 0.00 〇 F04.05 DC Brake Field Weakening Time at Start 0.00 - 30.00 s 0.50 〇 F04.06 Pre-Excitation Current 50.0 - 500.0 (100.0=Idling Current) % 100.0 〇 F04.07 Pre-Excitation 0.00 - 10.00 s 0.10 〇 F04.08 Rotation Speed Tracking Method 0: Start from Maximum Frequency 1: Start from Stop Frequency 2:

Start from Grid Frequency 0 〇 F04.09 Not Used - - - - F04.10 Deceleration Time of Rotation Speed Tracking 0.1 - 20.0 s 2.0 〇 F04.11 Rotation Speed Tracking Current 30.0 - 150.0 (100.0=Rated Current) % 60.0 ● F04.12 Rotation Speed Compensation Gain 1.00 - 1.30 1.05 ● F04.13 Not Used - - - - F04.14 Acceleration/Deceler ation Mode 0: Linear Acceleration/Deceleration 1: S Curve Acceleration/Deceleration 0 〇