User’s Guide for EM760 series high-performance vector inverter 54 1.0-10.0 (rated power of the inverter: 5.5-7.5kW) 1.0 - 8.0 (rated power of inverter 11 - 45kW) 1.0 - 4.0 (rated power of inverter 55 - 90kW) 1.0 - 3.0 (rated power of inverter 110 - 560kW) F00.24 Automatic adjustment of carrier frequency 0: Invalid 1: valid 1 2: valid 2 1 F00.25 Noise suppression of carrier frequency 0: Invalid 1: Noise suppression mode 1 of carrier frequency 2: Noise suppression mode 2 of carrier frequency 0 F00.26 Noise suppression width 1~20 1 ● F00.27 Noise suppression intensity 0-10: Noise suppression mode 1 of carrier frequency 0-4:
Noise suppression mode 2 of carrier frequency 0 ● F00.28 Options of motor parameter group 0: parameter group of motor 1 1: parameter group of motor 2 0 F00.29 User password 0~65535 0 F00.30 Model selection 0: G type 1: P type 0 F00.31 Frequency resolution 0:0.01Hz 1: 0.1Hz (speed unit: 10rpm) 0 F00.32 Frequency point corresponding to the lower limit of carrier frequency 0.00~F0.33 Hz 20.00 F00.33 Frequency point corresponding to the upper limit of carrier frequency 10.00~150.00 HZ 50.00 F00.34 Lower limit of carrier frequency 1.0~F00.23 kHz 2.0 F00.35 380V inverter supply voltage selection 0: 380V 1: 440V 0 F00.36 Start/stop channel selection for communication control 0:
Modbus 1: Profinet 2: EtherCAT 3: CANopen 10: All protocols are valid 0 F00.37 Communication-specific channel selection 0 F00.38 Parameter locking function selection 0: Locked for all command channels 1: Only the keyboard locked 0 F00.39 Single-brush and 0: Single-brush 0