User’s Guide for EM760 series high-performance vector inverter 58 24: Switching of RUN command to keyboard 25: switching of RUN command to communication 26: Frequency source switching 27: clearing of regular running time 28: speed control/torque control switching 29: torque control prohibition 30: motor 1/motor 2 switching 31: resetting of simple PLC status (running from the first segment, with the running time cleared) 32: simple PLC time pause (keep running at current segment) 33: Zero-servo command 37: length counter input (≤250Hz) 38: High-speed length counting input (≤100kHz, only valid for X7) 39: length clearing 40: pulse input (≤ 100 kHz, only valid for X7) 41: process PID pause 42:
process PID integral pause 43: PID parameter switching 44: PID positive/negative switching 45: stop and DC braking 46: DC braking at stop 47: immediate DC braking 48: fastest deceleration to stop 50: external stop frequency source to AI1 53: Switching of main frequency source to AI2 54: switching of main frequency source to AI3 55: Switching of main frequency source to high-frequency pulse input 56: switching of main frequency source to communication setting 57: inverter enabling 69: Reserving prohibited or 89: Reset feedforward 121: External material cutoff signal 122: Wiring detection signal 123:
Brake reset terminal F02.15 Positive/negative logic 1 of digital input terminal D7 D6 D5 D4 D3 D2 D1 D0 *0000000 * X7 X6 X5 X4 X3 X2 X1 0: positive logic is valid in the closed state/invalid in the open state 1: negative logic is valid in the closed state/invalid in the open state F02.16 Positive/negative logic 2 of digital input terminal D7 D6 D5 D4 D3 D2 D1 D0 00000000 X11 X10 X9 X8 AI4 AI3 AI2 AI1 0: positive logic is valid in the closed state/invalid in the open state 1: negative logic is valid in the closed state/invalid in the open state F02.17 Filtering times of digital input terminal 0-100; 0: no filtering; n:
sampling every nms 2 F02.18 X1 valid delay time 0.000~650.00 s 0.000 ● F02.19 X1 invalid delay time 0.000~650.00 s 0.000 ● F02.20 X2 valid delay time 0.000~650.00 s 0.000 ● F02.21 X2 invalid delay time 0.000~650.00 s 0.000 ● F02.22 X3 valid delay time 0.000~650.00 s 0.000 ● F02.23 X3 invalid delay time 0.000~650.00 s 0.000 ● F02.24 X4 valid delay time 0.000~650.00 s 0.000 ● F02.25 X4 invalid delay time 0.000~650.00 s 0.000 ● F02.26 Minimum input pulse frequency 0.00 to maximum input pulse frequency F02.28 kHz 0.00 ● F02.27 Minimum input setting –100.0~+100.0 % 0.0 ●