User’s Guide for EM760 series high-performance vector inverter 66 F06.11 Upper limit of speed control brake torque 0.0~250.0 % 165.0 ● F06.12 Excitation current proportional gain ACR-P1 0.00~100.00 0.50 ● F06.13 Excitation current integral time constant ACR-T1 0.00~600.00 0.00: no integral ms 10.00 ● F06.14 Torque current proportional gain ACR-P2 0.00~100.00 0.50 ● F06.15 Torque current integral time constant ACR-T2 0.00~600.00 0.00: no integral ms 10.00 ● F06.17 SVC zero-frequency processing 0: braking 1: not processed 2:
seal the tube 2 F06.18 SVC zero-frequency braking current 50.0-400.0 (100.0 is the no-load current of the motor) % 100.0 F06.20 Voltage feedforward gain 0~100 % 0 ● F06.21 Flux weakening control options Asynchronous motor Ones place: Asynchronous flux weakening mode 0: No PI adjustment output Non-zero: PI adjustment output Tens place: Output voltage limiting method of asynchronous motor in the flux weakening mode 0: F06.22 output voltage limiting according to bus voltage 1: F06.22 output voltage limiting according to rated voltage Synchronous motor Ones place: Synchronous motor flux weakening mode 1: Invalid 1: direct calculation 2: automatic adjustment Tens place:
Output voltage limiting method of synchronous motor in the flux weakening mode 0: F06.22 output voltage limiting according to bus voltage 1: F06.22 output voltage limiting according to rated voltage 1 F06.22 Flux weakening voltage 70.00~100.00 % 100.00 ● F06.23 Maximum flux weakening current of synchronous motor 0.0-150.0 (100.0 is the rated current of the motor) % 100.0 ● F06.24 Proportional gain of flux 0.00~60.00 0.50 ●