sinee — EM760 User Manual

User’s Guide for EM760 series high-performance vector inverter 67 weakening regulator F06.25 Integral time of flux weakening regulator 0.001~6.000 s 0.200 ● F06.26 MTPA control options of synchronous motor 0: Invalid 1:

valid 1  F06.27 Self-learning gain at initial position 0~200 % 100 ● F06.28 Frequency of low frequency band of injection current 0.00-100.00 (100.00 is the rated frequency of the motor) % 10.00 ● F06.29 Injection current of low frequency band 0.0-200.0 (100.0 is the rated current of the motor) % 40.0 ● F06.30 Regulator gain of low frequency band of injection current 0.00~10.00 0.50 ● F06.31 Regulator integral time of low frequency band of injection current 0.00~300.00 ms 10.00 ● F06.32 Frequency of high frequency band of injection current 0.00-100.00 (100.00 is the rated frequency of the motor) % 20.00 ● F06.33 Injection current f high frequency band 0.0-30.0 (100.0 is the rated current of the motor) % 8.0 ● F06.34 Regulator gain of high frequency band of injection current 0.00~10.00 0.50 ● F06.35 Regulator integral time of high frequency band of injection current 0.00~300.00 ms 10.00 ● F06.36 Magnetic saturation coefficient of synchronous motor 0.00~1.00 0.60  F06.37 Stiffness coefficient of speed loop 0~20 11 ● F06.40 Amplitude of injected reactive current of synchronous motor -50.0~+50.0 % 10.0  F06.41 Open-loop low-frequency processing of synchronous motor 0:

VF 1: IF 2: IF in start and VF in stop 3: Throughout SVC 0  F06.42 Open-loop low-frequency processing range of synchronous motor 0.0~50.0 % 8.0  F06.43 IF injection current 0.0~600.0 % 80.0  F06.44 Time constant of pull-in current of magnetic pole 0.0~6000.0 ms 1.0 