User’s Guide for EM760 series high-performance vector inverter 68 F06.45 Initial lead angle of magnetic pole 0.0~359.9 ° 0.0 F06.46 Speed tracking proportional gain of synchronous motor 0.00~10.00 1.00 F06.47 Speed tracking integral gain of synchronous motor 0.00~10.00 1.00 F06.48 Filtering time constant of speed tracking of synchronous motor 0.00~10.00 ms 0.40 F06.49 Speed tracking control intensity of synchronous motor 1.0~100.0 5.0 F06.50 Speed tracking control threshold of synchronous motor 0.00~10.00 0.20 F06.51 Rise time of injected active current of synchronous motor 0.1~50.0 s 5.0 F06.52 Linear transition code value of compensation in dead zone 1~1000 15 F06.53 Excitation current setting for frequency switching from F3 to F4 0.0~100.0 % 50.0 ● F06.54 Switching frequency 3 0.00~50.00 HZ 6.00 F06.55 Switching frequency 4 0.00~60.00 HZ 10.00 F06.56 Steady load torque and current setting 0.0~150.0 % 30.0 F06.57 Filtering time constant of current 0.001~5.000 ms 0.350 F06.58 Start injection pulse width 0.020~5.000 ms 0.050 F06.59 Switching frequency 1 0.00~F06.60 HZ 0.00 F06.60 Switching frequency 2 0.00~(F06.54/2) HZ 1.00 F06.61 Current setting for self-learning at the initial position 0.10~1.25 0.90 F06.62 Speed ring proportion for rotation self-learning 0.00~100.00 2.00 F06.63 Speed ring integral time for rotation self-learning 0.000~30.000 s 0.150 F06.64 Acceleration time for rotation self-learning 5.00~100.00 s 20.00 F06.65 Deceleration time for rotation self-learning 5.00~100.00 s 20.00