US Army Materiel Command AMCP 706-197 — AMCP 706-197 Reliability Prediction Handbook — US Army Engineering Design Guide PDF

Downloaded from https://www.everyspec.com AWO 706-97 TABLE 9". EFFECT OF REDUNDANCY, CAE 13 1* 4.88 4.88 4.88 9.S2 9.52 9.52 18.1 18.1 18.1 (1"6) (13.9) (5.81) 118.4) 2 Cold standby; n elements total; imparfect switch and monitor; constant failure rates. Failure probabilities listed in the body of the Table. r 0.05 =0.10 r 0.20 1 0.1 0.01 1 0.1 0.01 1 0.1 0.01 if 4.88 4.8 4.88 9.52 9.52 9.52 18.1 18.1 18.1 (1") (13.9) (5.81) (4.97) (25.9) (11.3) 49.66) (39.3) (21.3) (18.4) 2 5.32 0.654 0.174 11.1 1.47 0.578 23.2 4.05 1.98 3 4.96 0.502 0.052 9.62 1.11 0.192 18.8 2.13 0.319 Imonior only 4.88 0.499 0.050 9.52 0.995 0.100 18.1 1.98 0.200 (.nitor onl Ik No monitor or switch To show trends only.

actually it is most impractical to have svitch and monitor with only 1 unit r E X t, X = element failure rate Xs, Xm = switch and monitor failure rates, respectively X - = Xs/X for this Table 4. For a given path and switching-device reliability equations (along with intuition) failure rate, reliability improvement increases indicate that standby redundancy is superior rapidly as the monitor failure rate decreases to active redundancy, and the number of redundany paths increases. Htowever, elements are not always The same is true if the monitor failure rate is s-independr,,L; switching is rarely perfect:

and held constant and the switching-device failure certain parts and components can fail without rate decreases. being energized. Therefore, it is most unlikely 5, Important improvement in mission that the simple standby system analyzed so reliability through redundancy results from far will he representative of practice. the use of switching devices and monitors that are much more reliable than the path being switched. 9-9 MAINTENANCE CONSIDERATIONS 9-8 A C T I V E V E R S U S ST A N D B Y The previous analyses of redundancy wer, REDUNDANCY based on the assump tion of unattended system operation. If maintenance is elements, perfect switching, and perfect improvements can be achieved.

See also Rofs. For the basic models s-independent considered, even greater reliability reliability of de-energized elements), the 17. 9-12