EPSON — Necessary settings and procedures for rear surface printing

Epson L-6034VW Operation Guide Various Print Settings E Set the following, and then press OK . F Remove the substrate on which the surface layer was printed, and load on the unwinder side. Install a new paper core on the rewinder side. Load the substrate so that the unwinder side unwinds clockwise and the rewinder side rewinds counter-clockwise. U “Loading the Substrate” on page 32 G Return the adjustment volume on the ionizer to 0. H Press Change Substrate from the Substrate Settings menu. I Select the substrate type you are printing on from the Change Substrate screen. J Use the key pad to enter the substrate width, substrate thickness, and paper core thickness.

K Select Clockwise as the Unwinding Direction . L Press Continue . M When feeding the splice, press Start . N Select Counterclockwise as the Rewinding Direction . O Press Continue . 152 Item Value Copies 1 Perform Eye Mark Verification Printing S elect