EPSON — 6.10 Unfinished label cut setting

6.9 Reprint setting  Function description:  This function sets whether to perform reprinting when an error, such as paper end, occurs during printing.  Select the setting from the following. Enable/Disable Default setting: Enable  Usage case:  Set if you want to change the reprint settings.  Command(s) used:  ^S(CWR,P or ^JZ 6.10 Unfinished label cut setting  Function description:  This function sets whether to cut unfinished labels in order to identify that printing has not been completed when an error, such as paper end, occurs during printing.  Select the setting from the following. Enable/Disable Default setting: Enable  Usage case:

 Set if you want to change the cut setting for unfinished labels.  Command(s) used:  ^S(CWR,C Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 74