CHASSIS MODIFICATIONS 2-92 E URO C ARGO E URO 4 - 5 Rear mudguards and wheel house 2.28 Rear mudguards and wheel boxes When vehicles are supplied without mudguards, the bodybuilder must fit them using similar installations as used by IVECO on similar vehicles. In making the mudguards, wheel arches, as well as the shape of the body, bear in mind that: - Ensure the wheels can turn even in the full bump condition with snow chains fitted, in compliance with the limits shown in the documentation supplied by IVECO. - The maximum width of the vehicle over the tyres must comply with the legal limits.
- The supporting structure should be sufficiently strong enough, avoiding any sudden variation in section. - The connection can be made to the vertical web of the vehicle’s side members or to the longitudinal sections of the subframe. In the first case, the connection must be made solely with screws, or directly under the superstructure (e.g., body, van, etc.), see Figure 2.42). If the supports are fixed the body longitudinals they can be welded or bolted. Figure 2.42 91472 2.29 Mudflaps If legally required, unless already fitted ex-factory, the bodybuilder must ensure that the complete vehicle is fitted with mudflaps. When mounting them legally required distances must be complied with.
Rear mudguards and wheel house Base - July 2006 Revi - June 2007 Print 603.93.431