Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

POWER TAKE-OFFS 4-27 E URO C ARGO E URO 4 - 5 Multipower 4.10 Multipower (Power take-off from rear of engine) Iveco Multipower is available on E160, E180 vehicles with 6 cyl. engine 280 Hp and 300 Hp. The maximum torque allowed is 900 Nm with a 1.29 ratio. The total PTO features a pneumo-mechanically controlled non-synchronized coupling; switch off the engine before making the coupling. PTO engagement while the engine is running, can be prevented by means of the control to the PTO engaged signaller located on the dashboard. To start the engine there must be no torque drawing from the PTO.

PTO disengagement can also be effected while the engine is running, provided that there is no torque drawing. The fitting of the Multipower PTO (ccp 2395) requires the Cruise Control (ccp 2463), a 90 A alternator (ccp 6315) and a 360 cc air compressor (ccp 6319). Figure 4.10 115536 Multipower Print 603.93.431 Base - July 2006 Revi - June 2007