Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

SPECIFIC INFORMATION AND INSTRUCTIONS 5-8 E URO C ARGO E URO 4 - 5 Figure 5.3 ST 13 Without Cruise Control ST 13 With Cruise Control CC OFF Steering column switch BB switch BB switch Cut off and insulate the bridge Vehicle wiring BB switch Vehicle wiring BB switch 116639 A bridge joins pins 14 and 16 (connection traced with a broken line in Figure 5.3). If the Cruise Control is used through external connector ST13, lithe jumper must be cut and insulated. ! The signal for starting / stopping the engine requires safety devices to be fitted so that these operations may be performed safely, both for the operator and for the people or property nearby.

Such devices must satisfy current legal requirements. It is the bodybuilder’s responsibility to identify and install the relevant safety devices (for example, parking brake on, gearbox in neutral etc), using solutions that guarantee that the function works correctly, and using components that are certified as reliable. Bodybuilder connectors Base - July 2006 Revi - June 2007 Print 603.93.431 Connections Pin Description Type Wire code Max.

load Remarks 17 Ground POWER 0000 10A Ground 18 PTO 1 sw INPUT 0131 10 mA PTO mode1 Open wire = PTO mode 1 not activated Close to Ground = PTO mode 1 activated 19 PTO 2 sw INPUT 0132 10 mA PTO mode2 Open wire = PTO mode 2 not activated Close to Ground = PTO mode 2 activated 20 PTO 3 sw INPUT 0123 10 mA PTO mode3 Open wire = PTO mode 3 not activated Close to Ground = PTO mode 3 activated 21 K30 POWER 7772 10 A K30