CHASSIS MODIFICATIONS 2-56 E URO C ARGO E URO 4 - 5 If the tilting cab exceeds the upper point of equilibrium, ensure that the added hydraulic device enables the cab to be held in the end-of travel, if it does not, fit a safety cable. Adopt the necessary measures to ensure that the cab locks properly on lowering. The original cab safety lock and warning light arrangement must remain unaltered. The cab suspension system must be adjusted to suit the added weight and new dimensions. This must be done rationally without affecting the normal movements of the cab. When working out a suitable cab suspension system, the following points must be observed:
- The cab’s attitude, designed for the standard vehicle, must not be altered. - The added part with its weight must not affect the original portion of the cab with its suspension. - Ensure normal oscillation of the cab along the vertical, longitudinal and transverse plane. If the cab has to be converted to a fixed cab, use similar suspension systems as those used on tilting cabs. Take care to provide a removable cowling, hatches and panels to enable inspection and maintenance work on the parts underneath. To ease workshop operations we recommend that a rear anchorage point be provided for lifting, or that it should be possible to fit a safety bar.
A cab modification may affect components such as the air inlet and filter. Using standard parts fitted to other models such as sleeper cab variants may offer a good solution and enable legal requirements to be met. Modifications of this type influence the operation and safety of the vehicle (suspension, tilting operations) which means that they must be carried out carefully and undertaking all the necessary steps to ensure safety. The cab suspension system must be adapted according to the additional weight and to the increased lenght. This should be done so that the normal movements of the cab are not compromised. ! Cab Modifications Base - July 2006 Revi - June 2007 Print 603.93.431