NAVSEA MIL-HDBK-802(SH) — MIL-HDBK-802(SH) Design of Electrical Equipment with Small Stray Magnetic Fields Manual PDF

Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 (b) The magnetic field will not be equal to zero unless A = O, N = O, or I - 0, none of which can be achieved in practice. (c) The conditions found on minesweepers are such that there will inevitably be some current loops that individually produce a magnetic field larger than can be tolerated. 5.2 Principles of design for small stray magnetic field. Some of the individual current loops will inevitably produce a larger stray magnetic field than can be tolerated. Such fields must be compensated for by adding other fields that are, as nearly as possible, equal and opposite.

This is the principle of compensation (see 4.3.1.2). It is so general and has so many ramifications that there are advantages to splitting it into a number of smaller and more specific principles. Doing this, and adding a number of other principles that do not fall under the general heading of compensation, we arrive at the following list of principles that have to be kept in mind when designing equipment for small stray magnetic field: (a) (b) The principle of simplicity (see 5.3). The principles of minimum magnetic moment and minimum separation (c) (d) (e) (f) (g) (h) (i.) (see 5.4). The principle of zero magnetic moment (see 5.5). The principle of series compensation (see 5.6).

The principle of parallel compensation (see 5.6 and 5.7) The principle of self compensation (see 5.8). The principle of mutual compensation (see 5.9). The principle of compatibility (see 5.10). The principle of minimum disturbance by magnetic material (see 5.11). The principle of final check (see 5.12). (j) 5.3 The principle of simplicity. The principle of simplicity states that the methods used to ensure small stray magnetic fields should be as simple as possible and should do the following:

(a) Make maximum use of the conductors that are needed in a piece of equipment for it to perform its function; and (b) Require minimum addition of extra conductors and components that have no purpose other than to reduce the stray magnetic field. 5.3.1 Extreme example. One conceivable way of getting a small stray magnetic field from a generator is as follows: (a) Take a generator that has been designed and built with no regard for small stray magnetic field. (b) Measure the stray magnetic field produced by the field current of the generator. Vary the current and take a number of readings. (c) Measure the stray magnetic field produced by the armature current of the generator.

Vary the current and take a number of readings. (d) Install two sets of compensating coils, which we will call stray field degaussing coils. magnetic . Each set would consist of three coils, one in each of three mutually perpendicular planes. One 72