Specifications EVO TRE 16 Factory facilities 35 Item Specifications Notes Network A communication speed of 100BASE-TX or more is recommended Please provide a network environment to which a PC can be connected. Item Specifications Notes Voltage 400 V ± 10 %, 3-phase + Neutral + Earth Frequency 50 / 60 Hz ± 3 % Power consump- tion 20 KVA Leakage current 300 mA or less Factory facilities Connected/Wired Type: Terminal block connection Connecting part model: CBD 16 (Manufacturer. by Cabur) Compatible crimped terminals (AWG12 Reference for wiring selection): 3-phase + Neutral: AI4-12 GY (PHOENIX CONTACT) Earth: R5.5-5 (J.S.T.) Wiring specifications (recommended):
600 V pressure resistance (UL1063 equivalent) Wire size of AWG12 or larger Item Specifications Notes Electrical power See "EVO TRE 16" on page 35. Pressurized air Connector: Connect with a Φ8 mm X 6 (ext. diam.) hose Pressure: Min. 0.6 MPa (6 bar) Flow rate: 1,500 Liter/hr Required for raising/lowering the cleaning tank, ink pressure, etc. Water Connector: 3/4 gas Pressure: 0.4 Mpa (4 bar) - 0.6 MPa (6 bar) Flow rate: Max. 100 Liter/hr {6,102 in3/h} Required for belt cleaning. Wastewater Connector: Φ100 mm Connect with a Φ40 mm (ext. diam.) pipe Required for wastewater for belt cleaning. Users are requested to dispose of wastewater according to local laws and regulations.