EPSON — EVO TRE 32

Specifications 36 Item Specifications Notes Waste liquid Flushing area Outer diameter of ink discharge outlet: Φ20 mm Applicable inner tube diameter: Φ19 mm Waste ink is discharged from the flushing area and cleaning station, and therefore it is neces- sary to provide a route for waste liquid in the factory's drainage system. Users are requested to dispose of waste ink according to local laws and regulations. Cleaning station Outer diameter of ink discharge outlet: Φ40 mm Applicable inner tube diameter: Φ38 to 39 mm Connector: Φ 125 mm Pipe length: 10 m Required for mist exhaust in the machine. If a 1,200 m3/h exhaust system is not avail- Exhaust Flow rate:

1,200 m3/hr {73,228,493 in3/h} (A tube diameter of Φ125 mm corresponds to a wind speed of 27.1 m/sec.) (A tube diameter of Φ200 mm corresponds to a wind speed of 10.6 m/sec.) able, please provide a mist exhaust fan. Network A communication speed of 100BASE-TX or more is recommended Please provide a network environment to which a PC can be connected. Flow rate: 1,200 m3/hr {73,228,493 in3/h} able, please provide a mist exhaust fan.

Exhaust (A tube diameter of Φ125 mm corresponds to a wind speed of 27.1 m/sec.) (A tube diameter of Φ200 mm corresponds to a wind speed of 10.6 m/sec.) A communication speed of 100BASE-TX or more is Please provide a network environment to Network recommended which a PC can be connected. EVO TRE 32 Item Specifications Notes Voltage 400 V ± 10%, 3-phase + Neutral + Earth Frequency 50/ 60 Hz ± 3% Power consump- 20 KVA tion Leakage current 300 mA or less Factory facilities Type: Terminal block connection Connected/Wired Connecting part model: CBD 16 (Manufacturer. by Cabur) Compatible crimped terminals (AWG12 Reference for wiring selection): 3-phase + Neutral: AI4-12 GY (PHOENIX CONTACT) Earth:

R5.5-5 (J.S.T.) Wiring specifications (recommended): 600 V pressure resistance (UL1063 equivalent) Wire size of AWG12 or larger Item Specifications Notes Voltage 400 V ± 10%, 3-phase + Neutral + Earth Frequency 50/ 60 Hz ± 3% Power consump- tion 20 KVA Leakage current 300 mA or less Factory facilities Connected/Wired Type: Terminal block connection Connecting part model: CBD 16 (Manufacturer. by Cabur) Compatible crimped terminals (AWG12 Reference for wiring selection): 3-phase + Neutral: AI4-12 GY (PHOENIX CONTACT) Earth: R5.5-5 (J.S.T.) Wiring specifications (recommended): 600 V pressure resistance (UL1063 equivalent) Wire size of AWG12 or larger