veda — Facts Manual

104 Saving Energy with Frequency Converters 4 Saving Energy with Frequency Converters 4.1 Potential Electric motors account about 48% of global electrical energy consumption (1). In Industrial applications the ratio is even higher. Depending on the region and the industrial area, 65-75% of electrical energy is used for electric motors. Therefore electrical drive technology holds a great deal of potential for reducing the worldwide energy consumption. Frequency Converters enable the development and improvement of more energy- effi cient motor technologies. Even more benefi cial is applying the main reason why FC’s were developed: adjustable speed control.

Speed control helps to optimise processes and operate motors at optimal speed and torque. When total potential savings that could be made in a system are defi ned as 100%, roughly 10% of that potential could be obtained through the use of more effi cient components, such as motors. Operation with adjustable speed control off ers potential energy savings of approx. 30%. However, the greatest savings (approx. 60%) are to be made by optimising the entire system. Increased efficiency 10% System optimization Adjustable speed control 30% 60% Fig.

4.1 Potential energy savings If a few key points are taken into consideration, FC’s can lead to high energy savings being quickly and easily realised as the majority of applications (approx. 60-70%) are suitable for speed control. In particular, fans and pumps - which cover almost 50% of the applications - are obvious targets because of their huge saving potential. (1) Source: 2008 – International Energy Agency