124 Electromagnetic Compatibility Common-mode and diff erential mode When referring to conducted interference the terms common-mode (CM) and diff erential-mode (DM) are often used. Source Load CM DM CM DM Reference ground Fig. 5.3 Common-mode and diff erential-mode The diff erential mode (DM) noise is conducted on both lines of the current loop in opposite directions, in series with the desired signal. The common-mode (CM) noise is conducted on both lines in the same direction and its return path is through a common reference ground.
5.2 EMC and Frequency Converters Emission FC’s involve fast switching of voltages (high du/dt rates) in the thousands of V/μs range with amplitudes in the 500 V – 1000 V range FC’s (depending on supply voltage) and high current levels. This makes FC a potential source of EMI and their EMC-correct installation needs to be carefully followed. Rectifier Inverter ( + ) L High du/dt W Shielded motor cable I cm M Load C cm1 C cm2 L ( - ) Heatsink/ chassis Fig. 5.4 Propagation of interference in a Frequency Converter C Vdc/2 (o) V U C Vdc/2