141 Protection against Electric Shock and Energy Hazards Circuit breakers Unlike fuses which are sacrifi cial devices that need to be exchanged after being blown, circuit breakers are electromechanical devices that can be simply reset after being activated. Because the speed of circuit breakers can be slower than fuses, their use needs to be carefully considered. The slow speed can lead to extensive damage in the protected device, subsequent overheating and even a fi re risk. Not all FC’s are suitably- designed to be protected with circuit breakers. Special considerations are taken in the design phase of FC’s to limit the damage in the case of a component breakdown inside the FC.
Such measures are, for example, special internal mechanical features in the enclosure, use of shields, use of defl ecting foils, etc. to limit the consequences of internal failures. It is essential to consult and strictly follow the recommendations found in the documentation of the specifi c FC regarding the use of circuit breakers, including the type and manufacturer of circuit breaker to be used, since the recommended devices have been tested with that FC.