162 Interfaces The principal diff erence between the interfaces and bus systems available on the market are the physical design and the protocols used. Which system is used depends on the requirements of the application in question. Fast processes such as packaging machines may need bus cycle times of just a few milliseconds, whilst response times of seconds may suffi ce for climate control systems. For the purposes of better classifi cation, communication systems can be considered in terms of data volume, transfer time and transmission frequency. The diagram below shows the basic division into three diff erent levels.
Company level Ethernet/TCP/IP TCP//IP/Ethernet Area controller Cell level Field level Fig. 8.10 Production pyramid • At the company level, large data volumes in the megabyte range are exchanged. The transfer times can extend to hours. • At the cell level, the data volume decreases to the kilobyte range. At the same time, the transfer time shortens (seconds) and frequency of data exchange (minutes/hours) rises. • At the fi eld level, very small data volumes of a few bytes or even bits are ex- changed. The transfer time and transmission frequency are a matter of milliseconds. The world’s most important fi eld buses have been standardised since 1999 in IEC 61158. Fieldbus EX Bus