Atari Games Final Lap — final_lap_2.jpg

Final Lap Maintenance . . Video Display Mounting Bracket Video Displ spray Hex Head Screw EMI PC Board EMI Enclosure Figure 3-4 Video Display and PC Board Removal brackets on the cabinet shelf. Replacing the Video Display 6. Carefully lift the display out. WARNING Perform the following procedure to replace the video To avoid dropping the video display, use display in the cabinet. Gee Figure 3-4.) extreme care when removing the display 1. Carefully lift the video display onto the display shelf from the cabinet. one weighing We recommend that no less than 150 pounds should attempt to remove addition, we recommend the display.

In that you wear gloves to protect your hands from the sheet-metal edges. in the cabinet. NOTE Whenever the cathode-ray tube and yoke are replaced as a single unit, readjust the brightness, size, and centering as de- scribed in the display manual. Also check 6. Replace the video display as described lowing procedure. in the fol- the purity and convergence according to the display manual instructions, but ad- just both only if required. 3-9