Basic software procedures 5.2 Completing the maintenance task 5.2.1 Updating or recovering the BIOS and iRMC S5 I For Japan: Follow the instructions provided separately. After replacing the system board, memory or a CPU, it is essential to upgrade the BIOS and iRMC to the latest version. The latest BIOS and iRMC versions are available from the Fujitsu support internet pages at: http://ts.fujitsu.com/support/ For Japan: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ I Note on the boot watchdog Before updating or recovering the BIOS and iRMC, ensure that the boot watchdog is disabled, see section "Disabling the boot watchdog" on page 78 .
After updating or recovering the BIOS and iRMC, enable the boot watchdog again, see section "Enabling the boot watchdog" on page 92 . I Fujitsu does not assume responsibility for any damage done to the server or for the loss of any data resulting from BIOS updates. 5.2.1.1 Updating or recovering the BIOS BIOS flash procedure К Perform the BIOS flash procedure as described in the "BIOS Setup Utility" reference manual of your server. BIOS recovery procedure К Perform the BIOS recovery procedure as described in the "BIOS Setup Utility" reference manual of your server. 82 Upgrade and Maintenance Manual RX2530 M4