Basic software procedures Using the flash tool The latest firmware files are available as ASPs (Autonomous Support Packages) for Windows or as DOS tools from the Fujitsu support web pages at: http://ts.fujitsu.com/support/ For Japan: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ К Select Drivers & Downloads . К From the Select Product drop down lists, choose your PRIMERGY server К Select Server К Select Fujitsu Server Primergy К Select Product Group К Select Product Family or enter its serial or ident number into the search field. К Select your operating system and version. К Select the desired component type (e.g. SAS RAID).
К Select your controller from the device list to expand a compilation of available drivers and firmware. К Select the desired file and click Download for further instructions. 5.2.4 Enabling Option ROM scan In order to configure an expansion card that has been installed or replaced, the Option ROM of the card has to be enabled in the BIOS. The firmware of the card is called by the BIOS upon reboot and can be entered and configured. Option ROM can be enabled permanently (e.g. in case of a boot controller that may require frequent setup) or temporarily for one-time configuration.
When permanently enabling a controllers’s Option ROM, keep in mind that only two Option ROMs can be activated in the BIOS at a time. К Enter the BIOS. К From the Advanced menu select Option ROM Configuration . К Identify the desired PCI slot and set its Launch Slot # OpROM setting to Enabled. 86 Upgrade and Maintenance Manual RX2530 M4