fujitsu RX2530 M4 — FUJITSU Server PRIMERGY RX2530 M4

Basic software procedures 5.2.15 Performing a RAID array rebuild After replacing an HDD that has been combined into a RAID array, RAID rebuild will be performed completely unattended as a background process. К Ensure that the RAID array rebuild has started normally. Wait until the progress bar has reached at least one percent. К Inform the customer about the remaining rebuild time, based on the displayed duration estimate. Figure 32: Progress bar (RAID array rebuild) V CAUTION! The system is now operational, however, data redundancy will not be available until the RAID array rebuild is complete.

Depending on the HDD capacity the overall process can take up to several hours, in some cases even days. I You may notice a slight performance impact during rebuild. RX2530 M4 Upgrade and Maintenance Manual 99