Downloaded from https://www.everyspec.com 4 AMCP 706.210 - 4 - - -DETONATOR~ SAFETY -C0OTTER 4 PIiN 4 ~BODY -'IIG PIN- SPRING SAFETY P:.N CKUID KNOB -SAFETY, INTERLOCK FIRING PIN FINGERS 'Figure 13-2. 'Pull-release Device -tension is applied to the trip wire, the trip plun- faces6f the fingers, the equations of-ec,iiibrium ger auid thp'firing piwt fur cantilever spring, will be fingers move-to -the right and compress the coil F F, spring.
'If the-large section of the fingers passesn F4 0 s 1 FIT sinO =- (36 4- 4 firom-beneath the shoulder, only the stiffness of the fingers and the friction at the joint can retard F 1 =F , sino - PyF, CoO their opening.-,As,- the..sprinig~force-k, -increases,, 'The- two -equations- are- s olved---simultanfeously- 'the forces at point B increase causing the fingers wihE.1--oyelthtrp ie rgein- to deflect and the joint to separate.- The trp freF predclrtt -ie plunger continues to the, right, and- the firing, pin is di"Ven into the detonator by the firing .ATCEE D Pin spring. The -forces on the- trip plunger and finger are L -' ia-led on Fig. 13-3.
The force F 1 atn as,\d the, reaction- to -a concentrated-load on a canti- 'ONL mCO lever, beam) is given by Sectin A -A En/orglhvtf 0, point aB1 SMOULOER- F 1 3IA , (3.5' -FORCE' where y is the deflection,-at B, Iis the effective -- /FTRiP OC legt f hefngrEisthe modulus of elasticity, GC and 'A i's the second moment of areaat~the sec- FIiN- -- tion AA .,Any consistent-set of dimensions may Figure- ij-3. -Expansible Socket of Pull-re lease b -used. If F, is the-component of F 1 normal to the Dvc 13.3