U.S. Army Material Command (AMC) AMCP 706-210 — FUZES - Engineering Design Handbook AMCP 706-210 (U.S. Army) PDF Download

Downloaded from https://www.everyspec.com AMCF 71-210 into the unreacted explosive exceeds the velocity as the vigor of initiation, particle size, amount of of sound through this explosive. This rate of ad- charge reacted initially, and other factors. vance is termed the detonation rate for the ex- plosive under consideration. High explosives are COLUMN OF HIGH FXPLOSIVE divided into two gro-ns: primary and secondary. 0111 1 1 1 1 Primary high explosives are characterized by ) _ .. . their extreme sensitivity in iritiation by both heat and shock.

The detonation rate stabilizes i in a short period of time and in a very small dis- tance even with a weak mechanical or beat stinu- - / Itt STABLE DETONATION - lus. It is generally considered that materials such I WAVE VELOCITY as lead ozide, lead styphnate, diazodinitrophenol, and hexanitromannite are primary high expl- - sires.0 Secondary high explosives are not readily ini- 1 tiated by heat or mechanical shock but rather by DISTANCE ALONG COLUMN --------- an explosive shock from a primary explosive. ў, VELOCITY OF SOUND WAVE Materials such as PETN, RDX, tetryl, Composi.

IN UNDISTURBED MEIUM tion B, Composition A-3, Composition C-4, TNT, and picratol are considered secondary high explo- Figure 4-2. Detonating High Explosive antes. Certain materials can be cited that apparently I show an overlapping of definitions even though /t these definitions are the ones commonly used. [ STABLE DETONATION For example, a double-base propellant when inl- S WAVE VELOCITY tiated with an igniter reacts as a low explosive; NONOTONATING " but this material can be made to detonate if it is 0 IGH EXPLO'. 1E a initiated with an intense shock. Conversely, M TNT, a high explosive, can be ignited by flame 0 under certain conditions, and it will burn with- - out detonating.

D ISTANCE THROUGH HIGH EXPLOSIVE - - The detonation velocities of high explosives =, VELOCITY OF SOUND WAVE are illustrated in Figs. 4-2 and 4-3. Fig. 4-2 IN UNDISTURSED MEDIUM shows a column of high explosive that has been Figure 4-3. Examples of Good and Poor initiated at 0. When the reaction occurs prop- Detonations erly, the rate of propagation increases rapid) exceeds the velocity of sound , in the unreacteu explosive, and forms a detonation wave that 4.2.3 CHARACTERISTICS OF HIGH EXPLOSIVES has a definite stable velocity. Fig.

4-3 shows the rate of propagation of a Some of the most important characteristics reaction front under ideal conditions (upper are sensitivity, stability, detonation rate, corn- curve) and poor conditionq °.)vwer curve). The patibility, and destructive effect. Although these reaction starts and becor !- a detonation if the properties are the ones of most interest to th( proper conditions exist. However, if the ini- fuze designer, they are, unfortunately, difficult tiating stimulus is insufficient or if the physical to measure in terms of an absolute index.

Stand- conditions (such as confinement or packig) are ard laboratory tests, empirical in nature, are still poor, the reaction rate may follow the lower used to provide relative ratings for the different curve. The front may then travel at a much explosives. Hence, the designer must rely upon lower speed and this speed may even fall off these until more precise methods of evaluation rapidly. are dev;sed. This growth of a burning reaction to a detona- input sensitivity iefers to the energy stimulus tion is influenced considerably by the conditions required to cause the explosive to react.

A highly -4f density, confinement, and geometry as well sensitive explosive is one that initiates as a result 4-2