Downloaded from https://www.everyspec.com AMCP 706-210 of a low energy input. All explosives have charac- Stability is the measure of an explosive's abil- teristic sensitivities to various forms of stimuli ity to remain unaffected during prolonged stor- such as mechanical, electrical, or heat impulses. age or by adverse environmental conditions (pres- The most common form of mechanical stinmu- sure, temperature, humidity). Samples of the ex- lus is impact. See 'Fable 4-1 for impact sensi- plosive are removed periodically (annually) from tivity ratings of explosives, Senttivity of an ex- storage and tested for any change in propertieb.
plosive to impact is determined by dropping a Ordinarily the time required for such surveillance 2-kg weight on a sample of the explosive from tests is too long, hence accelerated tests are car- different heights. Sensitivity is then defined as ried out under simulated environmental condi- the least height at which 1 out of 10 tries results tions. Weight loss, volume of gas evolved, time in an activation. The greater the drop height, the for traces of nitrogen oxides to appear, tempera- lower is the sensitivity. Different apparatus yield ture of ignition, decomposition, or detonation slight differences in results.
There are two types provide data from which the stability oi the ex- of apparatus commonly employed:, one devel- plosive may be inferred with a reasonable degree oped by the Bureau of Mines 3 and one by of certainty. Picatinny 4,rsenal 4 . ('omipatibility implies that two materials, such as an explosive charge and its container, do not TABLE 4-1. IMPACT SENSITIVITY OF EXPLOSIVES react chemically when in contact with or in proximity to each other, particularly over long PA Illpa(t periods of storage. Incompatibilities may pro- irop of .- ky Bur,,au of duce either more sensitive or less sensitive com- xploste Weight, in. Mines, in. )pounds or affect the parts they touch.
If the Lead Styphnate 3 7 sive, coating or plating it with a compatible mate- Lead Azide 5 7 metal container is incompatible with the explo- TNT 14 40 rial will often resolve the difficulty. The com- RDX 8 13 patibility of two materials may be determined Tetryl 8 11 by st3ring them together for a long Lime under Composition B 14 30 both ordinary and extreme conditions of temper. ature and humidity. Table 4.2 lists compati- Heat energy may be applied as friction. The bility relations among various metals and corn- friction pendulum test measures sensitivity of an mon explosive materials. The blank spaces indi. explosive when exposed to a pendulum on which cate no definite results to date.
a shoe swings and rubs on the explosive. This Table 4-3 lists several physical properties of test shows to what extent the i:plosive is af- high explosives. The densities are given in g/cm 3 fected by friction and impact. and the detonation velocities in m/sec. Other Another method for determining sensitivity to properties are found in standard reference explosive input is provided by a brisance test. books ' ". Bnsance is the shattering effect shown by an ex- Table 4-4 contains a list of common explo- plosive. The weight of a primary explosive neces- sive materials.
They are used, for example, in sary to obtain the maximum crushed sand from primers, detonators, leads, and boosters (see the sample explosive is found. The standard test par. 4-3). uses a sand bomb holding 200 g of special sand. A No. 6 blasting cap containing 0.4 g of the sample explosive is buried in the sand. The 42.4 PRECAUTIONS FOR EXPLOSIVES weight of lead azide (used to initiate the sample explosive) necessary for the sarnpl to crush the No explosive materials are safe; but when greatest amount of sand is the measure of input handled properly, all of them are relatively safe'. sensitivity.
For example, explosive A is con- The first requisite for safe handling of explosives sidered nore sensitive than explosive B if less is to cultivate respect for them. One who learns azide is required for A than for B. Other recent only by experience may find that his first ex- methods for measuring output include tests of perience is his last. The potentialities of all com- detonation rate, internal blast, plate dent, air mon explosives should be learned so that any shock, and cord gar tests. one of them can be handled safely. 4-3 I ~ m