Supermicro H8DMT/H8DMT-F — Table 4-5. NorthBridge Configuration Submenu

Chapter 4: BIOS Table 4-4. Advanced Chipset Control Submenu Table 4-5. NorthBridge Configuration Submenu 4-5 Menu Item Description XNorthBridge Configuration submenu See Table 4-5 for further details and submenus. XSouthBridge Configuration submenu See Table 4-6 for further details and submenus. Menu Item Description XMemory Configuration Bank Interleaving Select Auto to automatically enable a bank-interleaving memory scheme when this function is supported by the processor. The options are Auto and DISABLED. Channel Interleaving Selects the channel-interleaving memory scheme when this function is supported by the processor.

The options are DISABLED, ADDRESS BITS 6, ADDRESS BITS 12, XOR of Address Bits [20:16, 6] and XOR OF ADDRESS BITS [20:16, 9]. Enable Clock to All Dimms Use this setting to enable unused clocks to all DIMMSs, even if some DIMM slots are unpopulated. Options are ENABLED and Disabled. Mem Clk Tristate C3/ALTVID Use this setting to ENABLE or Disable memory clock tristate during C3 and ALT VID. Memory Hole Remapping When Enabled, this feature enables hardware memory remapping around the memory hole. Options are Enabled and DISABLED. CS Sparing This setting will reserve a spare memory rank in each node when enabled. Options are ENABLE and Disable.

DCT Unganged Mode This setting enables unganged DRAM mode (64-bit). Options are AUTO (ganged mode) and Always (unganged mode). Power Down Enable This setting enables or disables the DDR power down mode. Options are Enabled and DISABLED. Power Down Mode This sets the power down mode. Options are Channel and CHIP SELECT. XECC Configuration ECC Mode This setting affects the DRAM scrub rate based on its setting. Options are DISABLED, Basic, GOOD, SUPER, MAX and USER. Depending upon the setting chosen, some or all of the following settings will become active: DRAM ECC Enable DRAM ECC allows hardware to report and correct memory errors automatically. Options are Enabled and DISABLED.

DRAM SCRUB REDIRECT Allows system to correct DRAM ECC errors immediately, even with background scrubbing on. Options are Enabled and DISABLED. 4-Bit ECC Mode Allows the user to enabled 4-bit ECC mode (also known as ECC Chipkill). Options are ENABLED and Disabled. DRAM BG Scrub Corrects memory errors so later reads are correct. Options are Disabled and various times in nanoseconds and microseconds. Data Cache BG Scrub Allows L1 cache RAM to be corrected when idle. Options are Disabled and various times in nanoseconds and microseconds.