H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual Table 4-5. NorthBridge Configuration Submenu (Continued) Table 4-6. SouthBridge/MCP55 Configuration Submenu Table 4-7. Processor & Clock Options Submenu 4-6 Menu Item Description L2 Cache BG Scrub Allows L2 cache RAM to be corrected when idle. Options are Disabled and various times in nanoseconds and microseconds. L3 Cache BG Scrub Allows L3 cache RAM to be corrected when idle. Options are Disabled and various times in nanoseconds and microseconds. X DRAM Timing Configuration Memory Clock Mode This setting specifies the memory clock mode. Options are Auto, LIMIT and MANUAL. DRAM Timing Mode This setting specifies the DRAM timing mode.
Options are Auto and DCT. X IOMMU Option Menu IOMMU Mode Used to disable or set the GART size in systems without AGP. Options are AGP Present, DISABLED, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB and 1 GB. Menu Item Description CPU/LDT Spread Spectrum Enables spread spectrum for the CPU/LDT. Options are Center Spread, DOWN SPREAD or DISABLED. PCIE Spread Spectrum Allows you to Enable or DISABLE spread spectrum for PCI-Express. SATA Spread Spectrum Enables spread spectrum for the SATA. Options are Enabled and DISABLED. USB 1.1 Controller Allows you to Enable or DISABLE the USB 1.1 controller. USB 2.0 Controller Setting to either Enable or DISABLE the USB 2.0 controller.
Legacy USB Support Select Enabled to enable support for USB Legacy devices.Use DISABLE to disable Legacy support if there are no USB devices installed in the system. AUTO disables Legacy support if no USB devices are connected. The options are DISABLED, Enabled and AUTO. Menu Item Description MTRR Mapping This determines the method used for programming CPU MTRRs when 4 GB or more memory is present. The options are Continuous, which makes the PCI hole non-cacheable, and DISCRETE, which places the PCI hole below the 4 GB boundary. Thermal Throttling Used to ENABLE or Disable thermal to generate a power management event.
Power Now This setting is used to ENABLE or Disable the AMD Power Now feature. Secure Virtual Machine Mode This setting is used to Enable or DISABLE SVM (Secure Virtual Machine). CPU Page Translation Table This setting is used to Enable or DISABLE the CPU Page Translation Table.