Hantek — 10.2 Burst Type

Burst EN Figure 10.1 N Cycle Burst For N Cycle mode, the trigger source includes "Internal", "External" or "Manual". Besides, users can set the "Phase", "Count", "Burst Period" (internal trigger), "Trigger Slope" (external trigger) and "Trigger" (manual trigger). Infinite Cycle Burst In Infinite Cycle mode, the cycle number of the waveform is set as an infinite value. The generator outputs a continuous waveform after receiving trigger signal. Press [Burst] > Type softkey to select “ Inf Cycle ”. A schematic diagram of infinite cycle pulse will be displayed on the screen. Figure 10.2 Infinite Cycle Burst For Infinite Cycle mode, the trigger source includes "Internal", "External" or "Manual".

Besides, users can set the "Phase", "Count" and "Trigger Slope" (external trigger) and "Trigger" (manual trigger). Gated Burst HDG3000C User manual Copyright © Qingdao Hantek Electronics Co., LTD 64