HP — Major Codes with Minor Codes

-99 Code Description Corrective Actions 14,117 A command failed while modeling 1. Download CFG file - check error code details. 2. Toggle failure - reference 14,129. 3. Check and reseat connectors/pins on J506 on the I/O card and J301 on the head board. 4. Replace Toggle Head assembly. 5. Replace PDB (U8 chip failure). 14,118 Invalid cyclic redundancy check Software error; will not be displayed 14,119 Operation already active Software error; will not be displayed 14,120 Invalid vector detected 1. Reprocess the part and send again. 2. Reorient part and send again. 3. If the frequency of the error is greater than once every three months, then replace the SBC or hard drive.

14,121 Processor Exception 1. Cycle power. 14,122 Processor halted 1. Cycle power. 14,123 Watchdog timeout 1. Cycle power. 2. Check all cable connections including thermocouples. 3. Escalate the case providing .cfg file. 14,124 Stack overflow 1. Cycle power. 2. If problem persists, replace controller board. 14,125 Runtime error 1. Cycle power. 14,126 Operation active - try again 1. Cycle power. 14,127 Invalid gender 1. Cycle power. 2. If problem persists, replace controller board. 14,128 Invalid platform 1. Cycle power. 2. If problem persists, replace controller board.