HP — What happens during Power Up / Boot

8. System displays “Copyright” screen and does not home within 5 minutes. 1. Cycle Power at the Circuit Breaker. 2. Reseat the IDE cable, Verify red line is to the right. 3. Reseat the connectors to the I/O Board. 4. Replace controller board. 5. Replace single board computer. 6. Replace hard drive. (Halted on Copyright screen) 9. System displays “Initializing” (Halted in Initializing) 1. Cycle Power at the Circuit Breaker. 2. Verify the Substrate Sensor is in the correct position. 3. Reseat the I/O Board. 4. Reseat the controller/SBC. 10. System displays “Starting Up / Calibrating” (Halted in Starting Up / Calibrating) 1. Cycle Power at the Circuit Breaker. 2.

Verify the Substrate Sensor is in the correct position. 3. Reseat the I/O Board. -123