HP — Installing the upper electronics bay cover

Figure 82: Upper electronics bay cover bottom mounting screw locations Remove the bottom left and right mounting screws 5. Lift the cover up and off of the top mounting screws. Installing the upper electronics bay cover 1. Slide the cover down on to the top left and right side mounting screws. 2. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, reinstall the bottom left and right side mounting screws. 3. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, tighten the top left and right side mounting screws. 4. Install the side panels. See “Installing the side panels” on page 164 5. Install the top panel. See “Installing the top panel” on page 162 -174