HP — Installing the electronics bay cooling fan

Figure 87: Electronics bay cooling fan mounting screw locations Remove the 4 mounting screws 7. Remove the cooling fan. Installing the electronics bay cooling fan 1. Align the cooling fan with the 4 mounting holes. 2. Using a 5 ⁄ 64 ” allen wrench, reinstall the 4 mounting screws. 3. Reconnect the P1 cable. 4. Close the electronics bay. See “Closing the electronics bay” on page 172 5. Install the side panels. See “Installing the side panels” on page 164 6. Install the top panel. See “” on page 162 -178