Removing the I/O card 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Open the electronics bay. See “Opening the electronics bay” on page 171 4. Touch the metal plate of the electronics bay cover to discharge any static electricity. 5. Disconnect the 6 cables from the I/O card by pushing in on the locking tabs and pulling outward. See Figure 96. Figure 96: I/O card cable locations Disconnect all 6 of the cables 6. Disconnect the thermocouple from the back side of the I/O card by pull- ing outward. See Figure 97. Figure 97: Chamber thermocouple wire location Disconnect the chamber thermocouple 7.
Using a Phillips screwdriver, remove the 3 mounting screws from the I/O card. See Figure 98. -185