HP — Installing the AC Input.

Removing the AC Input 1. Open the electronics bay. See “Opening the electronics bay” on page 171 2. Touch the metal plate of the electronics bay cover to discharge any static electricity. 4. Remove the LF-N (white) spade connector. See Figure 114. 3. Remove the LF-G (green) spade connector. See Figure 114. 5. Remove the LF-P (black) spade connector. See Figure 114. Figure 114: AC input connection locations LF-N (white) LF-P (black) LF-G (green) 6. Using a Phillips screwdriver, remove the 2 mounting screws and remove the AC Input. See Figure 115. Figure 115: AC input mounting screw locations Remove the mounting screws Installing the AC Input. 1.

Install the 2 AC Input mounting screws with a Phillips screwdriver. 2. Connect the LF-P (black) spade connector. 3. Connect the LF-N (white) spade connector. 4. Connect the LF-G (green) spade connector. 5. Close the electronics bay. See “Closing the electronics bay” on page 172 -198