HP — Installing the Head Cooling fan

Figure 134: Head cooling fan mounting screw locations Remove the 2 mounting screws 6. Remove the head cooling fan. Installing the Head Cooling fan 1. Align the head cooling fan with the 2 mounting holes. 2. Using a 7 ⁄ 64 ” allen wrench, reinstall the 2 mounting screws. 3. Reconnect the J258 cable. 4. Install the upper electronics bay cover. See “Installing the upper electron- ics bay cover” on page 174 5. Install the side panels. See “Installing the side panels” on page 164 6. Install the top panel. See “Installing the top panel” on page 162 -211