HP — Installing the material tubes

Material Tubes Required Tools • 5 ⁄ 16 ” nut driver or standard screwdriver • 1 ⁄ 4 ” nut driver • 5 ⁄ 32 ” allen wrench • Cutters Removing the material tubes 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Remove the upper electronics bay cover. See “Removing the upper elec- tronics bay cover” on page 173 4. Remove the umbilical hose. See “Removing the umbilical hose” on page 241 5. Feed the material tubes out through the energy chain. Installing the material tubes 1. Feed the material tubes through the energy chain. 2. Reinstall the umbilical hose. See “Installing the umbilical hose” on page 245 3.

Reinstall the upper electronics bay cover. See “Installing the upper elec- tronics bay cover” on page 174 5. Reinstall the top panel. See “Installing the top panel” on page 162 4. Reinstall the side panels. See “Installing the side panels” on page 164 -246