XY Table Components Y Home Sensor Required Tools • 1 ⁄ 4 ” nut driver or standard screwdriver. Hardware • 6-32 x 3 ⁄ 8 ” slotted screw (x1) Removing the Y home sensor 1. Remove the top panel. See “Removing the top panel” on page 161 2. Disconnect the Y home cable by pressing in on the tab and pulling out- ward. See Figure 196. Figure 196: Y Home sensor cable location Disconnect the Y Home cable 3. Using a 1 ⁄ 4 ” nut driver or standard screwdriver, remove the mounting screw. See Figure 197. -249