Figure 198: Y EOT sensor cable location Disconnect the Y EOT cable 3. Using a 1 ⁄ 4 ” nut driver or standard screwdriver, remove the mounting screw. See Figure 199. Figure 199: Y EOT sensor mounting screw location Remove the mounting screw 4. Remove the Y EOT sensor. Installing the Y EOT Sensor 1. Align the Y EOT Sensor with the mounting hole. 2. Using a 1 ⁄ 4 ” nut driver or standard screwdriver, reinstall the mounting screw. 3. Reconnect the Y EOT cable. 4. Install the top panel. See “Installing the top panel” on page 162 -251