HP — Removing the Y Motor Belt

Y Motor Belt Required Tools • 5 ⁄ 16 ” nut driver or standard screwdriver. • Dial indicator and belt tension gauge assembly Hardware • 10-32 x 3 ⁄ 8 ” slotted screws (x30) • 3-16 x 1” fender washer Removing the Y Motor Belt 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Remove the upper electronics bay cover. See “Removing the upper elec- tronics bay cover” on page 173 4. Remove the left side access panel. See Figure 217. -263